MSZ70 Injection Blow Molding Machine
/// Techhnical Features:
Both perform and blow station use 3-cylinder clamping unit, mold open speed high, production high capacity.
Dual hydraulic system with servo pump drive, more precision control on clamping, and energy saving more than 25%.
Horizontal injection design, plasticating reliable and easy operation.
Triangular beam make the structure strong and more stable perfrmance.
/// Optional:
Servo rotation device: improve rotate positioning accuracy.
Electric preplastication, can be synchronization in plasticising.
Pneumatic stripping plate, safe and clean.
Linear guide beam, small resistance, high precision.
| No.Of cavities | 4 | 6 | 9 | 12 | 13 | 16 | 18 | 20 |
| Neck Diameter(mm) | 45 | 40 | 35 | 35 | 30 | 25 | 20 | 10 |
| Body Diameter | 80 | 60 | 50 | 45 | 40 | 30 | 25 | 20 |
| Max. Height(mm) | 220 | 180 | 140 | 100 | 80 | 60 | 50 | 40 |
| Max. Volume(ml) | 1000 | 400 | 200 | 100 | 60 | 30 | 20 | 15 |
| Injection system | Unit | MSZ70 | |
| Screw Diameter | mm | 50 | 50 |
| Screw L/D | 23：1 | 23：1 | |
| Injection weight(HDPE) | g | 298 | 360 |
| Max.screw speed | rpm | 10-235 | |
| Heating capacity | KW | 10.8 | |
| Clamping system | |||
| Clamping force of injection | KN | 750 | |
| Clamping force of blowing | KN | 89 | |
| Max.Platen size(L*W) | mm | 800×390 | |
| Min.Mold thickness(H) | mm | 280 | |
| Heating capacity of mould | KW | 6 | |
| Stripping system | |||
| Stripping stroke | mm | 270 | |
| Dry cycle | sec | 3.5 | |
| Driving system | |||
| Motor power | KW | 30 | |
| Hydraulic pressure | Mpa | 15 | |
| Product range | |||
| Suitable bottle range | ml | 5-800 | |
| Max.bottle height | mm | ≤220 | |
| Max.Dia.of bottle | mm | ≤100 | |
| Others | |||
| Min.Air pressure | Mpa | 1.0 | |
| Discharge rate of compressed air | M³/min | ≥0.8 | |
| Water flowage | M³/h | 5 | |
| Total rated power with mold heating | KW | 46.8 | |
| Dimension(L*W*H) | M | 4.06×1.8×2.45 | |
| Net weight | ton | 9 | |