MSZ70AE Injection Blow Molding Machine
/// Techhnical Features:
High-efficient production: multi-action synchronization and ind ependent control can shorten the product molding cycle to the greatest extent, l.2 seconds higher than the standard machine dry cycle time and the efficiency can be improved by 15- 35%.
User-friendly: highly intelligent all- motor control system helps users quickly produce qualified products wwith low noise, lowv vibration and more comforta ble environme.
Energy saving and environmental protection: precise control of each action can greatly reduce the energy consumption of machine a ction. I he overall energy saving effect is 25- 4Û% higher than that of the servo hydraulic machine.
Precision and stability: the fast response full closed-loop control system ena bles the position accuracy up to 0.01mm, which ensures the precision, stability and consistency of products and improves the yield.
/// Classic Case:
| Preform system | Unit | MSZ70AE | |
| Screw diameter | mm | 50 | 55 |
| Screw L/D | L/D | 23：1 | 23：1 |
| Shot volume | cm3 | 392 | 475 |
| Injection weight(HDPE) | g | 372 | 450 |
| Max.Screw speed | rpm | 10-300 | |
| Heating capacity | KW | 10.8 | |
| No.of heating zone | Qty | 3+N | |
| Clamping system | |||
| Clamping force of preform | KN | 750 | |
| Clamping force of blowing | KN | 89 | |
| Opening stroke of mold planten | mm | 140 | |
| Lifting H of rotary table | mm | 70 | |
| Max.Platen size(L×W) | mm | 800×390 | |
| Min.mold thickness(H) | mm | 280 | |
| Heating capacity of mould | KW | 6 | |
| Stripping system | |||
| Stripping stroke | mm | 230 | |
| Dry cycle | sec | 2.1 | |
| Product range | |||
| Suitable bottle range | ml | 5-800 | |
| MAX.bottle height | mm | ≤200 | |
| Max.Dia.of bottle | mm | ≤100 | |
| Other | |||
| Min.air pressure | Mpa | 1 | |
| Discharge rate of compressed air | m3/mm | ≥0.8 | |
| Water flowage | m3/h | 5 | |
| Total rated power with mold heating | KW | 73.8 | |
| Dimension(L×W×H) | M | 5.02×1.95×2.49 | |
| Net weinght | ton | 9.3 | |
