Victor Machinery

Extrusion lines · PTFE tape

Teflon (PTFE) Tape Production Line

The SFFD-series line is the upstream equipment for PTFE (Teflon) products: it turns PTFE material into calendered base tape over 300 mm wide and 0.05–0.3 mm thick, for membranes, filter media, fibre, sewing thread and more.

  • Automated feeding and roughcast pressing
  • Calender roll runout below 5 μm
  • Customised to your specification
Request a quote
Victor SFFD series Teflon tape production line

How the line works

  1. 1Mixing & pre-pressingPTFE powder is mixed with solvent and pre-pressed into a cylindrical roughcast.
  2. 2ExtrusionThe roughcast is extruded through a shaped die into a thin rod, then held in a heat-insulating water tank.
  3. 3CalenderingThe rod enters the two calender rollers through a fishtail guide plate and is rolled into strip.
  4. 4WindingThe PTFE base tape is wound after calendering; an oil-removing machine is optional.

Typical uses of the base tape

  • PTFE microporous film
  • Waterproof breathable composite fabrics
  • PTFE-coated filter media
  • Dust filter bags
  • Long and short PTFE fibre
  • Sewing thread
Base tape width
> 300 mm
Base tape thickness
0.05–0.3 mm
Calender roll runout
< 5 μm

Line configuration

  • Roughcast press
  • Extruder
  • Heat-insulating water tank
  • Calender
  • Winding machine
  • Oil-removing machine (optional)
  • 01

    automated

    Distinctive automated feeding and roughcast process not only save manpower, but also reduce labor intensity.

  • 02

    high-precision

    The calendar roller use super large diameter and weight, circular runout less than 5μm, ensure stable baseband quality.

  • 03

    customizable

    According to customer's specific requirement, design device and implement special features.