Injection blow molding machine
MSZ50AE All-Electric IBM Machine
All-electric servo drives control every key movement independently and precisely, with low noise, clean operation and fast response. An efficient plasticizing unit keeps production of medium-size containers stable.
- Bottle volume
- 5–2000 ml
- Dry cycle
- 2 s
- Clamping force
- 528 kN
- Screw diameter
- 45 / 50 mm
Technical features
Technical Features
- All-electric configuration meets the requirements of a clean workshop.
- Servo motor and ball screw drive mold opening and closing: fast, precise and adaptable to many products.
- Three-plate, four-guide-pillar injection unit with closed-loop control of injection and charging for consistent products.
- An optimised correction algorithm positions every movement precisely, stably and quickly.
Gallery
MSZ50AE in the Victor factory
Machines photographed at our Zhangjiagang plant during assembly and testing.
Machine details
Key components of the MSZ50AE
From the clamping unit to the control system, every key component is chosen for stable continuous production and easy maintenance.
Electrical cabinet
Zoned wiring and centrally arranged control components make maintenance and troubleshooting straightforward.
- Stable control
- Easy maintenance
PLC control
Process parameters are set from one screen for easy commissioning, product changeover and status monitoring.
- Intuitive operation
- Fast setup
Three-station rotary table
Injection, blowing and stripping stations follow one another continuously, holding indexing accuracy and a steady cycle.
- Accurate indexing
- Continuous production
Clamping system
Fast, smooth clamping keeps the mold evenly loaded and the bottles consistent.
- Stable clamping
- Even force
Injection screw
The screw and injection unit balance plasticizing efficiency with shot-to-shot repeatability.
- Efficient plasticizing
- Stable injection
Stainless-steel hopper
Feeds resin steadily and is easy to clean during material or colour changes.
- Steady feeding
- Easy cleaning
Energy test
All-electric vs hydraulic: MSZ70AE against MSZ70
A 150 ml HDPE round bottle on a 9-cavity mold. The all-electric MSZ70AE runs a shorter cycle and uses markedly less energy for every 100,000 bottles.
| Model | MSZ70 | MSZ70AE |
|---|---|---|
| Cavities | 9 | 9 |
| Bottle weight | 21 g | 21 g |
| Cycle time | 16.4 s | 14 s |
| Output | 1,975 pcs/h | 2,314 pcs/h |
| Energy per 100,000 bottles | 978 kWh | 705.6 kWh |
| Time per 100,000 bottles | 50.6 h | 43.2 h |
Source: Victor Machinery test data, 2026 product catalogue. Results depend on bottle design, resin and mold.
27.9%
less energy per 100,000 bottles
14.6%
less production time
Applications
Product Application
Pharmaceutical & medical 
Cosmetics 
Personal care 
Food packaging
Parameter Table
Values as published by the manufacturer. Final configuration is confirmed by a Victor engineer against your bottle drawing and acceptance conditions.
Swipe the table sideways to see all specifications →
| Parameter | Unit | MSZ50AE | MSZ50AE |
|---|---|---|---|
| Screw diameter | mm | 45 | 50 |
| Screw L/D | L/D | 23:1 | 23:1 |
| Shot volume | cm³ | 318 | 392 |
| Injection weight (HDPE) | g | 301 | 372 |
| Max. screw speed | rpm | 10–235 | |
| Heating capacity | kW | 11.5 | |
| No. of heating zones | Qty | 3+N | |
| Clamping force (preform) | kN | 528 | |
| Clamping force (blowing) | kN | 109 | |
| Opening stroke of mold platen | mm | 165 | |
| Lifting height of rotary table | mm | 80 | |
| Max. platen size (L×W) | mm | 560×390 | |
| Min. mold thickness (H) | mm | 240 | |
| Heating capacity of mold | kW | 3.6 | |
| Stripping stroke | mm | 270 | |
| Dry cycle | sec | 2 | |
| Motor power | kW | 9.8 | |
| Hydraulic pressure | MPa | — | |
| Suitable bottle volume | ml | 5–2000 | |
| Max. bottle height | mm | ≤200 | |
| Max. bottle diameter | mm | ≤100 | |
| Compressed air pressure | MPa | 1 | |
| Compressed air discharge | m³/min | ≥0.8 | |
| Cooling water flow | m³/h | — | |
| Total rated power (with mold heating) | kW | 95.65 | |
| Actual power consumption | kW | 15–23 | |
| Recommended main switch | A | 125 | |
| Recommended wire diameter | mm² | 25 | |
| Dimension (L×W×H) | m | 4.8×1.75×2.6 | |
| Net weight | ton | 7.4 | |
Certificates
Certified quality and safety
Victor’s management system is certified to ISO 9001, ISO 14001 and ISO 45001, and every model carries CE conformity. Where a destination market requires UL or CSA approval, Victor supports the customer’s application in that country.
- ISO 9001
- ISO 14001
- ISO 45001
- CE
Precision
More from the All-electric series (AE)
Energy saving, low noise, high precision and intelligent control in one clean machine – the benchmark for pharmaceutical and premium packaging that needs strict process control.
Trust
Technical Content Review
Content on this page is reviewed by Victor's engineering team before publication. Specifications, process guidance and application notes are checked against current machine documentation.
- Role
- Senior Engineer
- Specialty
- Injection blow molding & packaging equipment
- Last updated
- 2026-10-14