Injection blow molding machine
Q3 Injection Blow Molding Machine for Eye Drop Bottles
A compact layout combines stable plasticizing, precise clamping and fast rotation. Easy to operate and maintain, it delivers neck accuracy, even wall thickness and quick changeovers for eye drop and other small bottles in limited floor space.
- Bottle volume
- 5–100 ml
- Dry cycle
- 1.8 s
- Clamping force
- 350 kN
- Screw diameter
- 28 mm
Technical features
Technical Features
- Dedicated eye drop bottle machine with a compact 3.08 × 1.49 m footprint, for bottles from 5 to 100 ml.
- 1.8 s dry cycle and screw speed up to 300 rpm for high output on small containers.
- Stable plasticizing, precise clamping and fast rotation keep neck accuracy and wall thickness consistent.
- Electric charging, stripping and rotation as standard; easy operation and maintenance with quick product changeovers.
Machine details
Key components of the Q3
From the clamping unit to the control system, every key component is chosen for stable continuous production and easy maintenance.
Electrical control
Key control and drive units are managed centrally to support stable, continuous production.
- Centralised control
- Stable running
Three-station system
The injection, blowing and stripping stations work in sync, shortening transfers between steps and raising the production rhythm.
- Synchronised stations
- Faster cycle
Blow valve unit
A centralised blow-air circuit keeps response fast and forming pressure stable.
- Fast response
- Stable pressure
Clamping system
Fast, smooth clamping keeps the mold evenly loaded and the bottles consistent.
- Stable clamping
- Even force
Injection unit
Plasticizing, metering and injection are integrated in one compact injection module.
- Integrated module
- Precise motion
Stainless-steel hopper
Feeds resin steadily and is easy to clean during material or colour changes.
- Steady feeding
- Easy cleaning
Applications
Product Application
Pharmaceutical & medical 
Cosmetics 
Personal care 
Food packaging
Parameter Table
Values as published by the manufacturer. Final configuration is confirmed by a Victor engineer against your bottle drawing and acceptance conditions.
Swipe the table sideways to see all specifications →
| Parameter | Unit | Q3 | |
|---|---|---|---|
| Screw diameter | mm | 28 | |
| Screw L/D | L/D | 23:1 | |
| Shot volume | cm³ | 67.7 | |
| Injection weight (HDPE) | g | 64 | |
| Max. screw speed | rpm | 10–300 | |
| Heating capacity | kW | 4 | |
| No. of heating zones | Qty | 5+N | |
| Clamping force (preform) | kN | 350 | |
| Clamping force (blowing) | kN | 100 | |
| Opening stroke of mold platen | mm | 160 | |
| Lifting height of rotary table | mm | 80 | |
| Max. platen size (L×W) | mm | 400×270 | |
| Min. mold thickness (H) | mm | 130 | |
| Heating capacity of mold | kW | 3 | |
| Stripping stroke | mm | 220 | |
| Dry cycle | sec | 1.8 | |
| Motor power | kW | 38.4 | |
| Hydraulic pressure | MPa | — | |
| Suitable bottle volume | ml | 5–100 | |
| Max. bottle height | mm | ≤88 | |
| Max. bottle diameter | mm | ≤36 | |
| Compressed air pressure | MPa | 1 | |
| Compressed air discharge | m³/min | ≥0.8 | |
| Cooling water flow | m³/h | 3 | |
| Total rated power (with mold heating) | kW | 45.4 | |
| Actual power consumption | kW | 8–15 | |
| Recommended main switch | A | 100 | |
| Recommended wire diameter | mm² | 16 | |
| Dimension (L×W×H) | m | 3.08×1.49×2 | |
| Net weight | ton | 4 | |
Certificates
Certified quality and safety
Victor’s management system is certified to ISO 9001, ISO 14001 and ISO 45001, and every model carries CE conformity. Where a destination market requires UL or CSA approval, Victor supports the customer’s application in that country.
- ISO 9001
- ISO 14001
- ISO 45001
- CE
Eye drop bottles
Q series for eye drop bottles
A dedicated injection blow molding machine for eye drop and other small bottles from 5 to 100 ml, with a 1.8 s dry cycle in a 3 m footprint and electric charging, stripping and rotation as standard.
Trust
Technical Content Review
Content on this page is reviewed by Victor's engineering team before publication. Specifications, process guidance and application notes are checked against current machine documentation.
- Role
- Senior Engineer
- Specialty
- Injection blow molding & packaging equipment
- Last updated
- 2026-10-14